Installation and maintenance of cement tilesTips and informative videos
Cleaning and maintenance products For all cement-based floors. Buy online
-
1:19 min
Tile installation
- Cement tiles must be installed on a well levelled, clean and dry surface. Humid subsoil will cause fur deposits on the tile’s surface.
- Cement tiles vary in tone and texture. Colours with a high concentration of pigments and plain tiles typically show variations from tile to tile. It is recommended to open several boxes to mix tones and textures for a nice organic finish.
- Apply the adhesive evenly on the surface the tile is being laid on, using a large-toothed comb trowel. Also apply adhesive on the back of the tile.
- Position the tiles with your hands – without hammering – leaving a thin gap (1 or 2 mm, thickness of a filling-knife) for the joint. A thicker gap should be used with under-floor heating and outdoor installation (min 2mm).
- Cutting: it is recommended to use a wet saw with diamond blade for best results.
- Once the tiles are installed and the cement adhesive dry, clean the surface by scrubbing it and clear with water. It will remove the thin layer of pigmented dust that can still cover the tiles.
-
0:30 min
Grouting
- Use white or light grey grout only, never use dyed or dark grout; pigments from the joint filler might stain the tiles irreversibly.
- Wipe the tiles with a moist sponge before grouting.
- Fill the gap between the tiles using a filling-knife, without spreading the grout on tiles.
- The grout surplus must be cleaned immediately with a wet cloth/sponge.
- Never use acid (cement dissolver) to remove the excess or stains of grout.
-
1:27 min
Treatment with sealer (Mosaic Sealer)
- The sealer is applied after the installation of the cement tiles, over a clean and dry floor.
- Mosaic Sealer is a solvent-based sealer that limits water and oil penetration.
- Mosaic Sealer impregnates the tile, reduces its porosity and keeps its natural matte aspect.
- It must be applied with a brush or a roller on a dry and clean surface. One or more successive applications until the tile is saturated. You may buff with a fine cloth to give it an even distribution.
- Do not apply too much. The excess would leave glistening stains on the surface (brush traces).
- Always try the sealer on a loose tile before applying it on the entire surface, in order to measure the grade of absorption of the tiles.
-
0:28 min
Maintenance of encaustic cement tiles
- A regular use of wax (for marble) enhances the colours, helps create a patina and protects the cement tiles.
- Clean with natural PH Neutral soap and water.
- Never clean with harsh detergents, acid or alkaline.
- The toughest stains can be smoothed out by scrubbing with an abrasive like Scotch Brite and/or a solvent (White Spirit).
-
0:53 min
Clean an aged or stained encaustic cement tiles floor
- Construction stains, excess sealer, dull and uneven floor ... You can clean and restore your cement tiles with a floor buffing machine, fiber discs and water (do not use abrasives).
Heavy traffic floors, bars, shops and restaurants - These floors require special protection and attention. Please consult our technical team.
-
15 sec
Cutting of cement tiles.
- Cement tiles and plinths can easily be cut with a diamond disc machine, whether the cut is straight or at a 45 degree bevel.
Cleaning and maintenance products For all cement-based floors
- Sealer
- Neutral Soap
- Neutral Wax
- Cleaner For household use
-
Price Prices are for tiles only, excluding any transport cost, duties or taxes.
Shipping is organised from our factory in Morocco or our logistics hub in Spain. The transit time by sea freight is approximately 2 months from departure of the factory for North America, the Middle East or Asia. : $32.5 Litre: 1LInfoPROPERTY - Mosaic Sealer is a liquid impregnator that limits absorption of water and oils into porous materials.
It penetrates the pores of the tiles and does not affect the natural finish of a cement floor.
This solvent and resin based product is to be applied with a brush, cloth or roller on a clean and dry surface. One or more successive applications until the tiles are saturated. Ensure the room is ventilated and avoid applying in excess.
Any sealer not absorbed within a few minutes will remain on the surface. You may buff the surface with a fine cloth to remove any excess and avoid a shiny or patchy finish. Always try the sealer on a loose tile before applying it on the entire surface, in order to measure the grade of absorption of the tiles.
DANGER - Highly flammable liquid and vapour. May be fatal in case of ingestion affecting airways.
May cause serious skin and eye irritation. Can cause drowsiness and vertigo.
Toxic to aquatic life with long-term negative effects. Should medical advice be required, take the label or container with you. Keep out of the reach of children. Keep away from heat sources, sparks, open flames and hot surfaces. No smoking. Wear protective gloves, clothes and eyewear and protective mask.
IN CASE OF INGESTION: Immediately call the POISON CENTRE or seek medical help.
IN CASE OF CONTACT WITH THE SKIN (or hair): Remove immediately contaminated clothing. Rinse skin with water or shower. IF INHALED, take the person outside and maintain in a comfortable position for breathing.
IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Do not swallow. -
Price Prices are for tiles only, excluding any transport cost, duties or taxes.
Shipping is organised from our factory in Morocco or our logistics hub in Spain. The transit time by sea freight is approximately 2 months from departure of the factory for North America, the Middle East or Asia. : $16.25 Litre: 1LInfoPROPERTY - Liquid PH neutral soap for daily use.
Diluted in water, the soap will disinfect and nourish cement based tiles.
DANGER - May cause serious eye irritation. Should medical advice be required, take the label or container with you. Keep out of the reach of children. Read the label before use. Wash hands thoroughly after use.
Always wear protective gloves, clothes and eyewear as well as a protective mask.
IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Remove contact lenses. Keep rinsing. If the irritation continues, seek medical attention. -
Price Prices are for tiles only, excluding any transport cost, duties or taxes.
Shipping is organised from our factory in Morocco or our logistics hub in Spain. The transit time by sea freight is approximately 2 months from departure of the factory for North America, the Middle East or Asia. : $22.75 Litre: 1LInfoPROPERTY - Liquid Wax which can be used diluted in water or pure.
Once dry, the floor can be buffed with a cloth, fibre or felt pads which will give the tiles a sheen and enhance colours. The wax will help create a patina and protect the tiles further.
DANGER - Product not classed as a risk for health or the environment. Keep out of the reach of children. Read the label before use. IN CASE OF INGESTION: Immediately call the POISON CENTRE or seek medical help.
IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Remove contact lenses. Keep rinsing. In case of an accident or drowsiness immediately call the POISON CENTRE or seek medical help. Should medical advice be required, take the label or container with you. Dispose of content and container according to local waste management regulations. -
Price Prices are for tiles only, excluding any transport cost, duties or taxes.
Shipping is organised from our factory in Morocco or our logistics hub in Spain. The transit time by sea freight is approximately 2 months from departure of the factory for North America, the Middle East or Asia. : $16.25 Litre: 0,75LInfoPROPERTY - The household stain cleaner helps tone down grease stains and other marks resulting from daily use with a cement tile floor. Spray the product thoroughly on the area to treat, leave it a few minutes before scrubbing with a buffing machine and fibre disc or a green scouring pad. Add water if necessary. Rinse very well the residues to finalise the process.
DANGER - Always wear protective gloves, clothes and eyewear as well as a protective mask. May cause serious skin and eye irritation.
Should medical advice be required, take the label or container with you. Keep out of the reach of children. Read the label before use.
IN CASE OF INGESTION: Rinse mouth and DO NOT induce vomiting.
IN CASE OF CONTACT WITH THE SKIN (or hair): Remove immediately contaminated clothing. Rinse skin with water or shower. IF INHALED, take the person outside and maintain in a comfortable position for breathing.
IN CASE OF CONTACT WITH THE EYES: Rinse carefully with water for several minutes. Remove contact lenses. Keep rinsing and do not ingest. In case of an accident, immediately call the POISON CENTRE or seek medical help. Dispose of content and container according to local waste management regulations. Do not use this product with a paint spray gun.